Cajun P550R/P880/P882 Switch Installation Guide
Unpacking and Installing
2-7
Installing the System on a Table Top
To install the switch chassis onto a table top:
To avoid injury, Avaya recommends that two people are required to
lift the switch onto a table top. A fully-loaded P550R switch weighs
60 kg (130 lbs). A fully loaded P882 switch weighs 80 kg (182 lbs).
Do not use the handles on the power supplies or fan assembly to lift
the switch chassis.
1.
Place the system on a surface that supports at least 80 kg
(182 lb).
2.
Install the supplied rubber feet to the bottom of the switch,
placing the feet about 1.3 cm (1/2 in.) from each corner of
the unit in the square recesses provided (Figure 2-4). Clean
the surface of any oils or residue before applying the feet.
Figure 2-4. Table Top Installation
3.
Check that all of the pre-installed components are firmly
installed in the chassis. These include:
—
Modules
—
Power supply and fan assemblies
Rubber Feet