Avaya AA1419043-E6, Installation Manual, Page: 57 / 72

Parameter Minimum encircled flux Notes
Optical launch for OM3 and
50
μ
m fiber
• 30% within 5
μ
m radius
• 81% within 11
μ
m radius
—
10GBASE-LR/LW SFP+ specifications
The 10GBASE-LR/LW SFP+ provides 10 GbE or OC-192 service at a nominal wavelength of
1310 nm. This SFP+ can attain link lengths of up to 10 km.
The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW
SFP+. The part number of this SFP+ is AA1403011-E6.
For more information about the 10GBASE-LR/LW SFP+, including test and measurement
information, see the IEEE 802.3ae standard.
Table 19: IEEE 802.3ae 10GBASE-LR/LW SFP+ specifications
Parameter Specifications
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance Up to 10 km
Link optical power budget 9.4 dB
Maximum transmitter and dispersion penalty 3.2 dB at 10 km
Transmitter characteristics
Line rate (nominal 10GBASE-LR 10.3125 Gb/s ±100 ppm (10
GbE)
Average launch power – 8.2 to 0.5 dBm
Minimum side mode suppression ratio 30 dB
Minimum launch power in OMA minus
transmission and dispersion penalty (TDP) – 6.2 dBm
Minimum optical modulation amplitude – 5.2 dBm
Maximum average launch power of OFF
transmitter
c
– 30 dBm
Minimum extinction ratio 3.5 dB
RIN
12
OMA (maximum) – 128 dB/Hz
Maximum optical return loss tolerance -– 12 dB
Maximum transmitter reflectance – 12 dB
Receiver characteristics
Line rate (nominal) 10GBASE-LR 10.3125 Gb/s ± 100 ppm (10
GbE)
Average receive power for BER 10
-12
– 14.4 dBm to 0.5 dBm
SFP+ specifications
Installation — SFP Hardware Components December 2012 57