Avaya AA1419043-E6, Installation Manual, Page: 40 / 72

To prevent damage to the optical receiver, ensure that at least 5 dB of attenuation exists
between the transmit and receive ports.
Table 7: 1000BASE-ZX DDI 1550 nm SFP specifications
Parameter Specification
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9
μ
m
Data rate 1.0 Gb/s
Line rate (8B/10B code) 1.25 Gb/s
Link optical power budget 24 dB
Maximum dispersion power penalty 2 dB at 70 km
Transmitter characteristics
Launch power 0 to 5 dBm
Receiver characteristics
Receiver sensitivity – 24 dBm
Maximum receiver power – 0 dBm
1000BASE-BX DDI SFP specifications
The 1000BASE-BX bidirectional SFPs provide gigabit Ethernet connectivity over a single
fiber.
Figure 2: 1000BASE-BX
As shown in the preceding figure, the transmit (Tx) and receive (Rx) paths share the same
fiber by using two different wavelengths. One model transmits at 1310 nm and receives at 1490
nm, while the mating model transmits at 1490 nm and receives at 1310 nm. You can only
connect a mating pair. The following table provides the part numbers for mating pairs.
Table 8: 1000BASE-BX DDI SFP part numbers
Reach 1310 nm 1490 nm
10 km AA1419069-E6 AA1419070-E6
SFP
40 Installation — SFP Hardware Components December 2012
Comments? infodev@avaya.com