Avaya AA1419043-E6, Installation Manual, Page: 44 / 72

Parameter Specifications
Maximum dispersion power penalty 2 dB at 70 km
Transmitter characteristics
Launch power 0 to 5.0 dBm
Receiver characteristics
Receiver sensitivity – 24 dBm
Maximum receiver power – 3.0 dBm
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbit/s Ethernet Carrier Sense Multiple Access with
Collision Detection (CSMA-CD) connectivity using multimode optical fiber. The 100BaseFX
uses an LED transmitter. The centre wavelength, spectral width, and optical rise/fall time satisfy
the trade-off curves in the FDDI PMD document (ISO/IEC 9314–3:1900). The supported link
length is up to 2 km over MMF. The part number for this model is AA1419074–E6.
The following table describes the 100BASE-FX SFP specifications.
Table 13: 100BASE-FX SFP specifications
Parameter Specifications
Maximum electrical power consumption 0.8 W
Connectors Duplex LC
Cabling
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance Up to 2 km using 500 Mhz-km MMF optic
cable
Wavelength 1300 nm
Link optical power budget 10 dB
Transmitter characteristics
Transmitter type LED
Nominal wavelength 1300 nm
Transmit output power (max) -14 dBm
Transmit output power (min) -23.5 to —20 dBm
Spectral width 140 nm (FHWM)
Minimum extinction ratio 10 dB
Receiver characteristics
Receiver type PIN photodiode
SFP
44 Installation — SFP Hardware Components December 2012
Comments? infodev@avaya.com