Avaya AA1419043-E6, Installation Manual, Page: 28 / 72

Do not allow the air extension tube to touch the bottom of the optical port.
Procedure
1. Remove dust or debris by blowing canned air into the optical port of the device using
the canned air extension tube.
2. Clean the optical port by inserting a wand moistened with alcohol into the receptacle
and rotating it.
Use each cleaning wand to clean only one optical port.
3. Dry the optical port by inserting a dry wand into the receptacle and rotating it.
Important:
Do not let the IPA evaporate; wipe it dry immediately. Alcohols can leave a residue
that is difficult to remove.
4. Remove lint by blowing compressed air into the optical port.
5. Reconnect the optical connector and check for proper function.
If you do not reinstall the connector, use a protective cap.
If problems persist, ensure that the connector or receptacle is free from damage.
Safety and equipment care
28 Installation — SFP Hardware Components December 2012
Comments? infodev@avaya.com