Avaya AA1419043-E6, Installation Manual, Page: 30 / 72

Job aid
The following table describes the reach provided by various SFPs. This table is informational
only—not all Avaya products support all the SFPs listed here.
SFP model Common application
1000BASE-T Lowest-cost gigabit Ethernet solution. Up to 100 m reach over
Category 5 (CAT5) unshielded twisted pair (UTP).
100BASE-FX Up to 2 km reach over multimode fiber pair.
1000BASE-SX Well-suited for campus local area networks (LAN) and intrabuilding
links. Up to 275 or 550 m reach (fiber-dependent) over a fiber pair.
1000BASE-LX,
100BASE-LX10 Up to 10 km reach over a single mode fiber (SMF) pair. Up to 550 m
reach over a multimode fiber (MMF) pair.
1000BASE-XD Up to 40 km reach over a single mode fiber pair.
1000BASE-ZX,
100BASE-ZX Up to 70 km reach over a single mode fiber pair.
100BASEBX-10 Up to 10 km reach over single mode fiber.
1000BASE-BX Up to 40 km reach. Bidirectional over one single mode fiber.
1000BASE-EX Up to 120 km reach over a single mode fiber pair.
SFPs are hot-swappable input and output enhancement components that permit Gigabit
Ethernet ports to link with other Gigabit Ethernet ports over various media types.
The system also supports Coarse Wavelength Division Multiplexer (CWDM) SFPs. CWDM
technology consolidates multiple optical channels on a common optical fiber. CWDM uses
multiple wavelengths to expand available bandwidth.
CWDM SFPs support high speed data communications for Metropolitan Area Networks (MAN).
The system uses a grid of eight CWDM optical wavelengths in both ring and point-to-point
configurations. All components are color-coded by wavelength.
Important:
The attainable cable length can vary depending on the quality of the fiber optic cable
used.
Use Digital Diagnostic Monitoring (DDM) to monitor SFP laser operating characteristics.
Support for Digital Diagnostic Interfaces (DDI—an interface that supports DDM) involves data
collection and alarm and warning monitoring. Static data collection includes SFP vendor
information, DDI support information, and DDI alarm and warning threshold values. Dynamic
data collection includes temperature, supply voltage, laser bias current, transmit power, and
receive power. DDM works during active laser operation without affecting data traffic.
The Virtual Services Platform 9000 only checks warning and alarm status bits during
initialization and during requests for dynamic data. If the system asserts or clears an alarm or
SFP
30 Installation — SFP Hardware Components December 2012
Comments? infodev@avaya.com