Avaya 6408+ User Manual Download Page 16 | Manualshive

Page: 16 / 34

background image

16

To place an AD call

1. Press the selected AD button, either a feature button or the softkey

below the AD feature on the feature menu screens.

To program or reprogram an outside number, extension, or feature
access code into an AD personal list

1. Locate the Program button on your telephone. There are three

possibilities.

a. If you are using a telephone with a display, press the Menu button

and, if necessary, the Next or Prev button until Prog appears on the
display screen.

b. If your telephone does not have a display or if Prog is not available

on your display, press

administered as a feature button.

c. Ask your system manager for the AD Program feature access code.

2. Pick up the handset or press

.

[dial tone]

3. Press the Program button (or dial the feature access code).

4. Dial the Personal List number (1, 2, or 3).

5. Dial the list item (1, 2, 3...) .

6. Dial the number you want to store (up to 24 digits) as you would

normally dial it.

7. Press

.

[confirmation tone]

8. Repeat Steps 5 through 7 if you want to program additional items on

the same list; hang up and begin again at Step 2 if you want to program
items on another list.

9. Hang up or press

to end programming.

Note: Record your personal list items on the Abbreviated Dialing list on the

cards in the tray under the telephone; group, system, and enhanced
list can be obtained from your system manager.

To place a call using an AD list button or code

1. Press the

or

or

buttons (if administered)

or Dial the appropriate AD List code for List 1, or List 2, or List 3.

[dial tone]

Note: An

(Enhanced List) may also be available; see your

system manager.

2. Dial the desired list item (1, 2, 3...).

The Call Forwarding feature temporarily forwards all your calls to another
extension or to an outside number, depending on your system.

To temporarily redirect all calls to an extension or outside number of
your choice

1. With a display: Press the Menu button and then press the softkey

below CFrwd (while on-hook or off-hook).

Call Forwarding All Calls

Program

Spkr

#

Spkr

Pers List

Grp List

Sys List

Enhcd List

«
...
14
15
16
17
18
...
»

Summary of Contents for 6408+



































Reviews:

No comments

Related manuals for 6408+

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 396

Brand: Panasonic Pages: 68

Brand: Aastra Pages: 2

Brand: Aastra Pages: 49

Brand: Aastra Pages: 2

Brand: Aastra Pages: 4

Brand: Aastra Pages: 7

Brand: Aastra Pages: 30

Clearspan 6757i

Brand: Aastra Pages: 2

Brand: Aastra Pages: 5

Brand: Aastra Pages: 4

Clearspan 6757i

Brand: Aastra Pages: 2

STARPLUS Triad-S 1

Brand: Vodavi Pages: 19

Hi-Phone Maestro

Brand: way2call Pages: 2

Brand: Yealink Pages: 347

Brand: VTech Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands