Avaya 555-233-784, User Manual

Page: 60 / 94

Accessing the Options Main Menus 4610SW IP Telephone Options
6-2 Issue 2.0 December 2003
Accessing the Options Main Menus
1. To access the Options application, press the Options button ( ) to
the right of and below the softkeys.
The first of three Options Main screens displays.
2. Use the standard paging indicators to move between the two Options Main
screens.
■
The three options categories displayed on the first Options Main
screen are as follows:
— Application Options: provides access to allow you to set the
Redial option, set the Phone screen display upon answering
or calling options, set the display of Call Timers, set the rate
at which messages display across the top of the screen, and
set Visual Alerting (flashing message light on incoming calls).
— View IP Settings: provides access to the View Status Main
screen #1, from which you may view IP Address
information/status, quality of service (audio and signaling)
status, and interfaces status, and the View Status Main
screen #2, from which you may view miscellaneous
phone/status data.
— Network Audio Quality: provides access to the Audio
Status screen #1, on which you can troubleshoot received
coding, packet loss and packetization delay, and the Audio
Status screen #2, on which you can troubleshoot network
delay and audio quality. Note that this option displays only
when you are on a call.
■
The three options categories displayed on the second Options Main
screen are:
— Contrast Control: provides access to the Contrast Option
screen, on which you adjust the 4610SW’s display area
contrast.
— Feature Button Labeling: allows you to customize a label on
a Feature Button, if desired.
— Log off: allows you to log the phone off for privacy and
security purposes.