Avaya 4630 User Manual Download Page 41

Page: 41 / 114

Using Your 4630/4630SW IP Telephone

Receiving Calls

Issue 2.0 December 2003

2-11

Transfer

The Transfer feature lets you transfer a call from your telephone to another
extension or outside number.

Sending a call to another telephone

1. With the call active (or with only one held call and no active calls), select

the Transfer (

) Feature button.

The call is placed on hold. You hear a dial tone, and the next available call
appearance line activates.

2. Dial the number to which you want to transfer the call.

3. Remain on the line and announce the call.

NOTE:

If the line is busy or if no one answers, return to the held call by
pressing the line button on which it is being held.

4. Press the Transfer (

) Feature button again.

The call is sent to the extension or number you dialed.

5. Hang up your handset.

Summary of Contents for 4630



















































































































Search results

Summary of Contents for 4630

Reviews:

Related manuals for 4630

Brands by name

Popular brands

Avaya 4630, User Manual

Search results

Summary of Contents for 4630

Reviews:

Related manuals for 4630

Brands by name

Popular brands