20
1. To store the
AVARI® Programmable Magnetic Rower,
simply keep it in a clean dry place.
2. Move the
AVARI® Programmable Magnetic Rower
with the moving wheels on the
FRONT
STABILIZER(2).
Lift the
REAR STAND(18)
to move the
AVARI® Programmable Magnetic Rower.
Do
not use the
SEAT(20)
to move the
AVARI® Programmable Magnetic Rower.
The
SEAT(20)
will move
and the
SEAT CARRIAGE(6)
may pinch your hand or fingers.
3. Follow the following process to fold The
AVARI® Programmable Magnetic Rower
as illustrated for
easy storage.
a. Remove the
LOCKING KNOB(22)
and
LARGE WASHER(78)
from the
CONNECTING BRACKET(5).
b. Pull out the
SPRING KNOB(23)
and fold up the
RAIL(4).
Make sure the
RAIL(4)
is locked securely
in the folded position by the
SPRING KNOB(23).
c. Store the
LOCKING KNOB(22)
and
LARGE WASHER(78)
by inserting the
LOCKING KNOB(22)
through the
LARGE WASHER(78)
and screwing it into the
SUPPORT RAIL(3).
!
CAUTION
Keep hands clear of the hinge when folding and unfolding the unit.
B
A
C
The safety and integrity designed into the
AVARI® Programmable Magnetic Rower
can only be
maintained when the
AVARI® Programmable Magnetic Rower
is regularly examined for damage and
wear. Special attention should be given to the following:
MAINTENANCE
STORAGE
1. Pull on the
HANDLEBAR(32)
and verify that the Magnetic System provides tension. The Magnetic
System should provide many years of use.
2. Clean the roller tracks in the
RAIL(4)
with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the
CAUTION LABEL(86)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
CAUTION LABEL(86)
if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the
AVARI® Programmable Magnetic
Rower
removed from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the
AVARI®
Programmable Magnetic Rower.
8. Keep your
AVARI® Programmable Magnetic Rower
clean by wiping it off with an absorbent cloth after use.
9. Check the condition of the
STRAP(27).
Replace the
STRAP(27)
if it is cracked or broken.
B
