CHAPTER 5
Instructions, use and maintenance manual
Page 48
D r a g o P Z e r o
Follow the procedure below to perform decommissioning, dismantling and removal of the machine at the end of
its operational life. The following operations as well as indications in the manuals of the equipment, machines,
partly-completed machinery and components used, supplied by AVANZINI BRUCIATORI s.r.l. as an integral part
of the instruction manual, must be taken into consideration for decommissioning purposes.
STEP
ACTION
1
Leave enough space around the machine so that the personnel is able to carry out the movements
without any risks, arranging for appropriate equipment.
2
Disconnect all energy sources using the power cut-off devices and lock them in the open position
(refer to the wiring diagram for additional information).
3
Disconnect the power cable from the cut-off device (first detach the power conductors and then the
earth conductors).
4
Disassemble the machine from the top downwards, paying special attention to the machine units
subject to falling by gravity and all parts which could have product residue.
5
As far as possible, separate the various components by type of materials, which must be disposed of
through separate waste collection.
Have the materials resulting from demolition disposed of by specific companies.
6
Remove the various parts of the machine from the work area.
IMPORTANT!
After having disassembled the machine according to the previous disassembly procedure, the
various materials must be segregated in compliance with standards of the country where the
machine must be eliminated.
Pursuant to the 2012/19/EU "
WEEE
"
DIRECTIVE, if the purchased component/equipment is
marked with the following crossed-out wheelie bin symbol, it means that the product must be
collected separately from other waste at the end of its lifespan.
IMPORTANT!
We remind you to comply with the laws in force regarding the disposal of processing residue.
