CHAPTER 5
Instructions, use and maintenance manual
D r a g o P Z e r o
Page 33
5.5.3. OVEN INSTALLED OUTDOORS
To install the oven outdoors, follow the same instructions provided in item
5.5.3.
Close the oven base on the 2 sides and in the rear, leaving the front part under the oven loading door open.
This configuration will prevent any draughts that would interfere with proper burner operation.
5.6. OPERATIONS ON OVEN INSTALLATIONS
This paragraph describes the physical characteristics and setting up procedures of the oven where the machine
will be installed.
The procedure described below can be followed in order to convert a conventional wood-burning oven into an
oven equipped with gas burner.
5.6.1. HOLE IN THE COOKING TOP
The Drago PZero burner is installed in the surface of the oven; the extensions of the torches have to pass through
the oven base, until they reach the level of the cooking surface.
This is done by means of drilling a special hole with diameter of 80 mm.
In the following layout, you can see the area of proper positioning of the hole.
B
A
IDEAL POSITION OF THE
HOLE
A
80 mm
B
100mm
The AVANZINI BRUCIATORI s.r.l. recommended position is the side part, either left or right, at a distance of 100
mm from the central axis; nonetheless, you can position the burner anywhere in the area marked off with a red
dotted line.
The company AVANZINI BRUCIATORI s.r.l. does not authorise any type of installation other than the indicated
layout.
The customer is solely responsible for making sure the final installation is in compliance with the requirements
in force.
CAUTION!
The machine, having to be used inside a production plant, is not equipped with its own fire-
prevention system. The user must evaluate the need for an adequate fire-prevention system for
the machine/site where the machine is installed and used.
