avantec DT910, User Manual, Page: 21 / 24

21
9.2 Received and missed call lists
When a call is received, it is automatically stored in the Call List of the
handset. Up to 50 entries can be stored in the Call List.
If a call is received when the list is full then the oldest entry will be
replaced.
All missed calls are stored in the Call List as well.
To view the Call List:
1.
Press key from idle mode, the last call is displayed.
2. Pressing key will move from the most recent to next call.
(i)
If the number is already stored in the
phonebook, the name from the
phonebook is displayed.
Press
key, the screen displays the
number and you can modify the number;
the second press on
key to call this
number.
(ii)
If the caller name is not provided, the caller’s number is
displayed.
One press on
key displays the number and you can modify
the number; the second press on key to call this number.
3.
Any press on goes back.
If multiple CIDs are stored in the same entry (i.e. if you receive the same
call twice) only one entry is stored in the call list. A screen with "Calls: 2"
appears after the number. If the CID has Name and Number, there is
no "Calls: 2" screen, but ":2" is added at the end of the name.
Note:
1. If the CLIP information does not contain the caller name, you will
see the caller number instead.
2. When a CID call is missed, is flashing.
3. When a CID call is answered, is switched off.