avantec DT910, User Manual, Page: 11 / 24

11
7. Handset SETUP
7.1 Handset Tone
7.1.1 Ring Volume (External Call)
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, “ HANDSET TONE ” is displayed.
4. Press key, “ RING VOLUME ” is displayed.
5. Press key to enter the menu.
6. Press / key to adjust the desired volume level (off, 1-5).
7. Press key to save the new value.
8. Press key to go back to standby screen.
Note: When the Ring volume is set to “ OFF ”, icon will be turned on
indicating that the ringer set to non-distribute/ silent mode.
7.1.2 Ring Melody
There are 12 ring melodies available.
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, “ HANDSET TONE ” is displayed.
4. Press key, then press key until
“ RING MELODY ” is displayed.
5. Press key, “Melody: x” is displayed
(x is the number of current melody).
6. Press / key to select the desired
melody.
7. Press key to save the new melody.
8. Press key to go back to standby screen.