avantec DT910, User Manual, Page: 14 / 24

14
7.3 Handset Name
User can assign a name to the handset which shows on the display
during standby.
1. In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, then press key until
“ HANDSET NAME ” is displayed.
4. Press key, the current handset
name is displayed.
5. Edit the handset name and press
key to save the change.
6. Press key to go back to standby screen.
7.4 Auto Answer
This feature allows the user to answer a call by simply lifting the handset
from base station, without the need to press the
key.
1. In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, then press key until
“ AUTO ANSWER ” is displayed.
4. Press key, the current setting is
displayed.
5. Use / key to switch between ON and
OFF.
6. Press key to save the change.
7. Press key to go back to standby screen.