avantec DT910, User Manual, Page: 12 / 24

12
7.1.3 Intercom Melody
1. In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, “ HANDSET TONE ” is displayed.
4. Press key, then press key until
“ INTERCOM ” is displayed.
5. Press key, “Melody: x” is displayed
(x is the number of current melody).
6. Press / key to select the desired
melody.
7. Press key to save the new melody.
8. Press key to go back to standby screen.
7.1.4 Key Tone
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, “ HANDSET TONE ” is displayed.
4. Press key, then press key until
“ KEY TONE ” is displayed.
5. Press key, the current setting is
displayed (TONE, MELODY or OFF).
6. Use / key to switch between “ TONE ”,
“ MELODY ” and “ OFF ”.
7. Press key to confirm and save the change.
8. Press key to go back to standby screen.
7.1.5 Low Battery
To enable/disable the low battery warning tone.
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ HS SETUP ” is displayed.
3. Press key, “ HANDSET TONE ” is displayed.
4. Press key, then press key until
“ LOW BATT ” is displayed.
5. Press key, the current setting is
displayed (ON or OFF).
6. Use / key to switch between ON and
OFF.
7. Press key to confirm and save the change.
8. Press key to go back to standby screen.