avantec DT910, User Manual, Page: 19 / 24

19
8.4.4 New PIN
Use this option to modify the PIN code.
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ BS SETUP ” is displayed.
3. Press key, then press key until “ ADVANCE SET ” is
displayed.
4. Press key, and enter PIN code (default as “0000”).
5. Press key until “ NEW PIN ” is displayed.
6. Press key, then enter the new PIN.
7. Press key to confirm.
8. Press key to go back to standby screen.
8.4.5 Default
Use this option to restore all factory default settings.
* Note: Running factory default will NOT erase the contents of the
user memories (such as phonebook, redial list, call log)
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ BS SETUP ” is displayed.
3. Press key, then press key until “ ADVANCE SET ” is
displayed.
4. Press key, and enter PIN code (default as “0000”).
5. Press key until “ DEFAULT ” is displayed.
6. Press key to confirm.
7. Press key to re-confirm executing
the factory default.
The phone will return to the previous sub-menu
after a few seconds indicating that the
“
DEFAULT ” procedure is completed.