Avante International Technology, Inc.
Version
4.4.3
42
4.7 Close Voting
When it is the time to close voting, the polling official should press the following screen with the
screen touch-code. (For information on how to set screen touch-code, refer the Ballot Generation
Module
Î
Database Settings)
Figure 4.7 A
When the correct touch-code is entered, the following screen will ask for polling officials’
username and password. The default user names are 11 and 22. There are no passwords. Enter 11
and press “OK’ then enter 22 and press “OK”.
Figure 4.7B
After the correct usernames and passwords are entered, press” OK” to go to Figure 4.7C.
The screen is divided into nine areas.
The screen touch-code is a
combination of 6 touches of any of
these nine areas. A touch on the first
of the six preset areas starts the
count; any subsequent incorrect touch
will set the count back to zero. Only
when the six preset areas are touched
in the correct sequence will the next
screen appear for entering password.
