AVANT STAGEV 860i, Operator'S Manual

Page: 83 / 148

Avant 860i Operating instructions
83
WARNING
Risk of fire and electric shock -
Check the voltage rating of the
block heater. Always use
approved type of cable.
Check
that the design voltage of the block
heater matches the mains voltage
of your area. The standard block
heater is intended to be connected
220-240 V AC mains socket.
Always plug the block heater to a
grounded socket that is equipped
with a residual current switch. Use
only original type of cable to
connect the block heater. Protect
electric sockets from rain.
WARNING
Risk of fire - Use correct type of
cable.
When the optional block
heater is installed on the loader, a
green electric mains cable is
provided with the loader. Do not
use other types of cables. The
cable must be approved for
outdoor use. The engine block
heater A410648 is intended to
operate with electric supply of
220 - 240 V, 50-60 Hz AC power.
Do not modify the cable or use
transformers. Contact your Avant
dealer or service point for
information about other types of
block heaters.
CAUTION
Risk of electric shock and
damage to loader - Disconnect
the block heater before
operating the loader.
Make sure
to disconnect and store away the
cable of the block heater before
moving the loader, in order to
prevent damaging the cable, or its
connectors. Always disconnect the
cable also from the electric mains
socket. Never leave the cable
hanging on the ground to avoid
potential electric shock.