Storage, Transport, Tie down points and Lifting
Avant 860i
100
.
The following picture shows the principle of lifting a
loader with the ROPS frame using four lifting straps:
CAB L:
When lifting a loader that is equipped with
the Cab L, remove the window panels (front, side
and rear window panel) before lifting.
CAB GT:
Special lifting equipment, such as lifting
beam and chains, is needed for lifting the loader
equipped with the cap GT. Loader can be lifted from
the tie down points in the front frame and rear frame.
WARNING
Risk of dropping of loader -
Never attempt to lift the loader
from the counterweights or use
them as tie-down points.
Eyelets
on extra side counterweights are
for installing or removing the
sideweight only. Remove eyelets
from counterweights to prevent
their use.
Towing (retrieval of the machine)
The loader cannot be towed. It is equipped with a
hydrostatic transmission and a hydraulic parking
brake, which can be released only when the engine
is running and there is enough pressure in the
hydraulic system. In case there is a technical failure
and the engine cannot be started or doesn’t start, the
loader must be pulled aside with another machine or
lifted e.g. with a forklift truck and transported to
service.
Summary of Contents for STAGEV 860i
