AVANT STAGEV 860i, Operator'S Manual

Page: 37 / 148

Avant 860i Description of the loader
37
.
Ballasted tyres
Some tyres can be filled with special type of heavy
foam that creates additional counterweight. The filled
tyres are also useful in area where frequent tyre
puncture with normal tyres would be expected.
When driving with a loader that has ballasted tyres,
the acceleration and stopping distances may be
increased.
Ballasted tyres do not have air pressure inside them
and do not require air pressure checks.
CAUTION
Ballasted tyres are heavy - Handle
ballasted tyres with care. Filling of
tyres should be left to professional
tyre service.
When the loader is equipped with ballasted tyres, the
following symbol must be applied to a visible location
on the loader frame near tyres. If you replace the
tyres and install normal tyres, make sure to also
remove this label.
.
Auxiliary hydraulics oil flow
The following graphs show auxiliary hydraulics
output flow at different engine rpm levels. The 1-
pump setting is illustrated with dashed line and 2-
pump setting with uniform line.
Some attachment may work optimally at certain flow
level, use the graph to estimate correct engine rpm
setting.
Maximum auxiliary hydraulics oil
flow cannot be used with all
attachments. Check correct engine
rpm for the attachment with the
help of this graph and the
Operator's Manual of the
attachment. Attachment may get
damaged, run too fast, or it may be
difficult to control precisely when
oil flow is too high.