AVANT STAGEV 860i, Operator'S Manual

Page: 69 / 148

Avant 860i Controls and options of the Loader
69
.
Lights
Work lights
The loader is equipped with standard work lights at
the front of the loader, which are controlled with a
switch near the ignition switch.
Extra work light kit (option)
The loader can be
equipped with extra
work lights, making it
easier to work in low
light. The Extra work
light kit includes two
extra lights on the
front and one at the
rear. The lights are
operated with the
switch on the control
panel.
Avant work lights are LED modules. There are
different brightness options, check your Avant dealer.
CAUTION
Risk of burns - Never touch the
lamp units.
The front surface and
the housing of the LED lamps can
get extremely hot during use.
Never touch or adjust the lights
during or immediately after their
use.
CAUTION
Risk of dazzling - Check that
lights are directed correctly.
Bright and powerful work lights
may dazzle yourself or other
persons nearby. Direct the lights
so that they do not disrupt the
visibility from the cab.
Headlight, beacon, blinker & reflector
kit (option)
This optional kit makes it possible to register the
loader for road traffic use in certain countries.
Requirements vary in different countries, please
consult your local AVANT dealer.
Always use lights and reflectors which comply with
local regulations.
The road traffic light kit itself does
not guarantee that the loader can
be used on road traffic area. Check
your local regulations concerning
the use of the loader on road
areas, need for registration, and
need for insurance.
Light control switch (road traffic light
kit)
Loaders that are fitted with the road traffic light kit
have a multi-function control switch fitted to the
steering column.
The switch has the following controls:

Headlights

High beam lights

Signal horn (duplicate switch, both the switch on
near the ignition key and switch on multi-function
control are connected)

Turn signals