AVANT Collecting Lawn Mower 1200 A21315, Operator'S Manual

Page: 14 / 28

14 (28)
Disconnecting hydraulic hoses:
Before disconnecting the fittings, lower the attachment to safe position on solid and level surface. Turn the
control lever of the auxiliary hydraulics to its neutral position.
When uncoupling the attachment, always disconnect the hydraulic couplings before
unlocking the quick attach plate, to prevent hose damage and any oil spills. Reinstall the
protective caps on the fittings to prevent impurities from entering the hydraulic system.
Releasing residual hydraulic pressure:
In case residual pressure is left in the hydraulic system of the attachment, it is often possible to disconnect the
hydraulic couplings, but it may be difficult to connect them the next time. If the fittings will not connect, the
residual pressure must be released by turning the auxiliary hydraulics control lever of the loader, when the
engine is turned off. To make sure that there will not be residual pressure in the hydraulic system of the
attachment, shut down the loader engine and move the auxiliary hydraulics control lever of the loader back
and forth before disconnecting the couplings.
5.2 Storage
Uncouple and store the attachment on level ground, but avoid leaving the attachment laying directly on
against the ground. Place it on blocks of wood or on a pallet, for example. The best way to store the
attachment is a place where it is protected from direct sunlight, rain, and extreme temperatures. Make sure
that the attachment is secured against all movements during storage, and never climb on the attachment.
Make sure the attachment is secured against any movement during storage. If
necessary, use, for example, blocks of wood under the supports to ensure adequate
stability.
Before winter storage, carefully clean the cutting deck and the mower components, removing all remaining
clippings. Touch up the paint where needed and grease the lubrication points to prevent rust damage.