background image

 

 

15 (28) 

 

 

6.

 

Instructions for use 

Check the attachment and the operating environment once more before starting to work, and that all obstacles 
have been removed from the operating area. Quick inspection of the equipment and the operating area before 
use are parts of ensuring safety and the best performance of the equipment. 

 

6.1

 

Checks before use 

 

 

Before using the mower, check that it is intact and that all protective covers are in place. 

 

 

Before each use, check the operation of the mower and ensure that the blades can rotate 
freely.  Check  that  there  is  no  string  or  other  foreign  material  coiled  around  the  blades, 
and that the floating linkage can move as intended. 

 

 

Remove or mark visibly all obstacles, such as trash, large tree branches or stones, from the working 
area  before  operation.  Check  the  area  for  possible  hidden  ditches,  manholes,  or  other  dangerous 
areas. Remember that tall grass can hide obstacles. 

 

Set and lock all four wheels of the mower to same height. 

 

Check that the collector box is empty,  the collector box door firmly shut, and that the collector tubes 
and fan are not blocked or damaged. 

 

Check the position of the collector control lever; make sure that is either full open or closed position. 

 

Ensure  that  bystanders  are  at  a  safe  distance  when  operating  the  equipment.  Do  not  let  anyone  to 
enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to 
reverse  with  the  loader.  Never  assume  that  bystanders  will  remain  where  you  last  saw  them; 
especially children are often attracted to the moving equipment. 

 

Check  the  general  condition  of  the  attachment  and  the  loader,  and  check  for  possible  hydraulic  oil 
leaks. The attachment must not be used, if there is a fault in the hydraulic system of the loader or the 
attachment. Refer to Chapter 7 for maintenance instructions. 

 

Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure 
that the loader and the attachment are used in a safe manner and as intended. Do not allow children 
to operate the equipment. 

 

Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 
may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment. 

 

Remember correct working methods and avoid leaving the driver’s seat unnecessarily. 

 

 

 

Regularly  clean  the  loader  oil  cooler  core;  refer  to  the  operator's  manual  of  the  loader   
for more instructions. Overheating oil decreases the power and affects the service life of 
the hydraulic components of both the attachment and the loader. 

 

 

Summary of Contents for Collecting Lawn Mower 1200 A21315





























Reviews: