AVANT A424013, Operator'S Manual For Attachment

Page: 8 / 36

8 (36)
WARNING

Make sure that overhead clearance is sufficient. Hitting an overhead obstacle may
cause the loader to tip over. Keep a safe distance from electric cables, lamps, or
other electric systems; hitting live parts may cause electric shock.

Fill only with materials that are suitable for use with the distributor bucket. Never fill
with hard or compacted materials.

Using too fine materials may cause spreading of dust. The bucket is not intended for
spreading grain or flour.

Keep the loader articulation in straight position when handling heavy loads. When
turning the articulation, the loader may tilt forward.

Observe maximum load indicated in the operator’s manual of the loader. Be
especially careful when the load sensor indicator is activated, if your loader is fitted
with a load sensor system.

Make sure that the surface can bear the total load. Also follow the correct tyre
pressure settings.

Ensure that ventilation is sufficient when operating indoors. Do not operate the loader
in closed spaces regardless of the engine or fuel type. Exhaust gases may
concentrate to hazardous levels.

Never use the attachment to lift or to transport persons or as any kind of work
platform even temporarily.

Make sure to use only an attachment that is in good condition. Check the attachment
thoroughly in regular intervals. Do not modify the attachment in a manner that would
affect its safety. It is prohibited to drill holes on the attachment, and welding or other
means of fixing hooks or other objects on the attachment is strictly prohibited.

Shut down the loader and place the attachment to a safe position as shown in Safe
stopping procedure before any cleaning, maintenance, or adjustments.

Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Pay attention to the contours of the terrain and other hazards, such as
branches and trees that can reach to the driver's area, loose rocks, and slippery
surfaces.

Make sure to use only an attachment that is in good condition. Do not modify the
attachment in any way that could affect its safety.

Use the attachment only for its intended purpose. Other use may create unnecessary
safety risks, and the equipment may get damaged.

Make sure that the loader is equipped with necessary safety components, and that
they are in working condition. Seat belt must be used. If there are specific hazards
related to the operating area, use appropriate safety equipment.

Also read the safety instructions and correct use of the loader from the operator's
manual of the loader.