AVANT A424013, Operator'S Manual For Attachment

Page: 28 / 36

28 (36)
4 Connect the hydraulic fittings and hoses as
shown in the adjacent figure.
5
Connect the electric supply as instructed on page
16.
6.6.4 Using the hydraulic side hatches
The actual hatch operation is controlled with auxiliary hydraulics control lever.
1 Select the desired hatch with hatch control valve manually.
2 Select between hatch and conveyor function as instructed below.
Proceed as follows:
1 Select the desired hatch

Turn the handle to left to select the left hatch

Turn the handle to right to select the right hatch

Leave the handle in the middle position to select
both hatches
2 A cable harness with a 2-way switch is delivered with
the attachment. Push the switch towards either direction
to select between hatch and conveyor function.
See page
16 for instructions about how to connect the
electric harness of the attachment.
Select the location of the switch in the cab so that it is
easily accessible but will not be used inadvertently.