AVANT A35409 Operator'S Manual Download Page 27 | Manualshive

Page: 27 / 47

AVANT A35409 Operator'S Manual Download Page 27

The pressure in both hydraulic and compressed air circuits of HK-compressor is considerably high. There at the
technical condition of your equipment should be under constant scrutiny. Operators and maintenance personnel
must always comply with local safety regulations and precautions in order to close out the possibility of damages
and accidents.

Especially couplings, valves and hoses should be maintained tight and clean as well as kept under constant
observation avoid possible leakages of pressure and hot blowouts. Hydraulic leakages must be rectified immediately
to avoid user and bystander injuries. Follow all your local safety instructions related to the high pressure
hydraulics.

In order to exclude possible accidents, it is not allowed to clean or inspect HK-compressor and pneumatic tools
when hydraulic or/and pneumatic circuit is pressurized. Prior to any cleaning, inspection and service hydraulic
system of your carrier machine must be stopped and both hydraulic and pneumatic circuits dissipated, for
instance, by opening the blow gun.
Always wear appropriate clothing and safety equipment such as goggles, ear protection and safety shoes at all
times when operating the compressor. When operating the compressor, beware of machinery parts warmed by
hot hydraulic oil.

EXTERME CLEANLINESS MUST BE MAINTAINED WHEN CARRYING OUT ANY SERVICE REPAIR DISSASSEMBLING OF
HK-COMPRESSOR AND HYDRAULIC SYSTEM. THIS IS CRUCIAL TO ENSURE SAFE, RELIABLE AND LONG-LIFE OPERATION
OF YOUR EQUIPMENT.

Hydraulic system of a carrier machine should be maintained according to the service program.
All installation and service of both hydraulic and electric equipment must be performed by qualified and
experienced personnel only.

SAFETY PRECAUTIONS

3/21

MAY CHANGE WITHOUT PRIOR NOTICE

WARNING STICKER

Dynaset dispatch department includes one (1) warning sticker bag per one (1) main product.
Product recipient is obligated to fix determinate warning sticker to Dynaset product.
Fix sticker to visible and appropriate place or close to Dynaset product where it’s easily seen.
Before fixing sticker clean surface with solvent detergent.

READ OPERATION INSTRUCTIONS. GENERAL CAUTION. BEWARE OF HOT SURFACE. USE EAR PROTECTOR.

BEWARE OF PRESSURE AIR.

HYDRAULIC COMPRESSOR HK400/8-23_PNE

July 2013 JLe

«
...
25
26
27
28
29
...
»

Summary of Contents for A35409
















































Reviews:

No comments