Avady POOLeasy pH, Instruction And User'S Manual

Page: 12 / 32

9
4.3 Unit installation
STEP 1: Installation of the fixing bracket
Fig. 4
STEP 2: Prepare the sensor for startup
STEP 3 : Drill a hole in the pipe using tool F

Place the bracket on the area it should be fixed to

Mark the holes and drill to the diameter indicated on the
plugs

Secure the bracket

Slide the pump into the bracket
1) Remove the
sensor's protective
cap and keep it to re-
use it for the winter
shutdown period
2) Leave the sensor submerged in
tap water for at least
20 minutes ,
before proceeding with the
calibration.
We therefore recommend that
you start your installation with
this step.
F
POOLeasy pH + POOLeasy RX