Page
13
of
56
Pendant Mount (IR-S Model)
For a proper pendant mount installation, the MCD-CMT-W pendant mount is required (sold separately). A
pendant mount should only be attached onto hard ceilings including wood, plastic, metal, and concrete.
Installation Notes:
1.
Three mounting screws are #10x1” wood or sheet metal screws (Three
mount anchors also included).
2.
Always ensure gaskets are properly seated.
3.
Use Teflon tape on threaded interfaces.
4.
3/8” male to 1/2” female NPT adapter included.
5.
Mount holes from camera housing to flange are not symmetrical.
Alignment features indicated must be properly lined up for mount hole
alignment.
