Page
46
of
54
clicking the time block to enable the
schedule settings on the selected time.
A light blue color on the time block
indicates that the alarm schedule is
enabled, while a light grey color
indicates that the alarm schedule is
disabled.
Alternatively, you can manually enter
the numbers to configure the hours and
minutes for the “start” and “end” of the
day.
S: Click “S” to set up a 24-hour
schedule on a particular day.
D: Click “D” to clear the previous
schedule on a particular day.
Trigger Alarm
Detection
When a signal is detected from Alarm
in the Alarm out will be triggered.
Trigger Motion
Detection
When a motion event is detected the
Alarm out will be triggered.
Trigger Tamper
Detection
When a tamper event is detected, the
Alarm out will be triggered.
Trigger Network Failure When a network failure event is
detected the Alarm out will be triggered.
Type
Selects the type: N.O (Normal Open) or
N.C (Normal Close)
Off Time
Specifies the alarm duration
Select channel
Select the desired channel to enable
tampering detection.
Enable Tampering
Detection
Enables Tampering Detection function.
Tampering Schedule
Configures the alarm schedule by
holding down the mouse button and
clicking the time block to enable the
schedule settings for the selected time.
A light blue color on the time block
indicates that the alarm schedule is
enabled, while a light grey color
indicates that the alarm schedule is
disabled.
Alternatively, you can manually enter
the numbers to configure the hours and
minutes for the “start” and “end” of the
day.
S: Click “S” to set up a 24-hour
schedule for a particular day.
D: Click “D” to clear the previous
schedule for a particular day.
