Page
6
of
54
If mounting the camera outside or in a wet environment, thread the camera cable through the hole on the
supplied rubber gasket and align with the three holes on the top of the housing. Ensure the gasket is
properly seated flush with the camera housing.
Figure 2: Mount the Surface mount to the wall or ceiling using the three holes on the housing
NOTE: If you use the side connection of the NPT port, remove the cap covering the side entrance,
otherwise; leave the cap in place. If using the NPT port, always use Teflon tape around the threads
to ensure proper sealing. The conduit fits ¾” NPT standard. Ensure NPT port is facing downward.
Using the three holes on the top of the camera housing, use the supplied screws and attach to the
mounting surface.
