Page
23
of
54
Adjusting the Pan, Tilt and Focus
1.
Remove the dome cover by loosening the captive fasteners with the supplied Philips head
screwdriver.
2.
Power on the camera to adjust the pan, tilt and focus.
NOTE: Ensure not to press the remote focus motor against the sides of the camera
module when adjusting the field of view (Figure
1)
.
Figure 1: Remote
focus motor
3.
To adjust the focus, see the Focus Section of this manual.
NOTE: Positioning the lens motor to close to the board may cause interference with
the magnetic Omni track. Ensure each lens motor is positioned away from the board.
Incorrect
Correct
