13
7 Settings
7.1 AU001-AU003
Teach with L+
L+
L
1
4
3
OUT
2 WH
BN
BK
BU
►
Start programming mode of the device.
► Connect teach input, 2 s...6 s → 7 Wire programming.
> LED flashes (1 Hz).
7.2 AU004-AU010
►
Start programming mode of the device.
►
Press button 2 s...6 s.
> LEDs flash (1 Hz).
AU001-AU010
If programming has not been completed successfully, the device returns to the previous setting.
AU004-AU010: This unit has an IO-Link communication interface. You will find more detailed information about
IO-Link and usage at www.autosen.com.
8 Window function, distance P1 > P2
AU001-AU003
Start programming mode of the device. (7.1)
►
Object in position P1.
►
Connect teach input approx. 1 s.
> LED flashes (2.5 Hz).
►
Object in position P2.
►
Connect teach input approx. 1 s.
> LED flashes (4 Hz).
> If programming is not completed success-
fully, the LED does not flash and the instru-
ment returns to the previous setting.
B P2
P1
Y
X
1
Output response
of the switching
X: Distance
Y: Comportamento dell‘uscita
①:
OUT1: (switching output)
B: Blind zone
P1: Setting point 1
P2: Setting point 2
Summary of Contents for AU001
Page 36: ...36 ...
