69
10.1.1 Switch between the menus
1� Change from the RUN mode to the main menu
[
●
]
2� Select the parameter EF
[
▼
]
3� Change to sub-menu EF
[
●
]
4� Select the parameters CFG, MEM, DIS
[
▼
]
5� Change to the sub-menus CFG, MEM, DIS
[
●
]
6� Return to the next higher menu level
Press [▲] + [▼] simultaneously
10.1.2 Change to the process value display (RUN mode)
There are 3 possibilities:
I�
Wait for 30 seconds (→ 10.1.4 Timeout).
II�
Press [▲] until the RUN mode is reached.
III�
Press [▲] + [▼] simultaneously until the RUN mode is reached.
10.1.3 Locking / Unlocking
The unit can be locked electronically to prevent unintentional settings�
On delivery: not locked�
Locking
►
Make sure that the unit is in the normal operating mode�
► Press [▲] and [▼] simultaneously for 10 s until [Loc] is displayed.
Unlocking
►
Make sure that the unit is in the normal operating mode�
► Press [▲] and [▼] simultaneously for 10 s until [uLoc] is displayed.
10.1.4 Timeout
If no button is pressed for 30 s during parameter setting, the unit returns to the
operating mode with unchanged values�
UK
Summary of Contents for AS005
Page 41: ...41 DE ...
Page 81: ...81 UK ...
