20
9.4.6 Read min/max values for the system pressure
► Select [HI] or [Lo] and briefly press [●].
[HI] = maximum value, [Lo] = minimum value�
Delete memory:
► Select [HI] or [Lo]�
► Press and hold [▲] or [▼] until [----] is displayed.
► Briefly press [●].
9.4.7 Reset all parameters to factory setting
► Select [rES]�
► Press [●].
► Press and hold [▲] or [▼] until [----] is displayed.
► Briefly press [●].
We recommend noting down your own settings before carrying out a reset
(→ 12 Factory setting).
9.4.8 Set colour change of the display
► Select [coLr] and set the function:
-[rEd] = display colour red (independent of the measured value)�
-[GrEn] = display colour green (independent of the measured value)�
-[r1ou] = display colour red when OUT1 switches�
-[G1ou] = display colour green when OUT1 switches�
-[r2ou] = display colour red when OUT2 switches ([ou2] = [Hxx] /
[Fxx])�
-[G2ou] = display colour green when OUT2 switches ([ou2] = [Hxx] /
[Fxx])�
-[r-12] = display colour red when the measured value is between the
limit values of OUT1 and OUT2 ([ou2] = [Hxx] / [Fxx])�
-[G-12] = display colour green when the measured value is between
the limit values of OUT1 and OUT2 ([ou2] = [Hxx] / [Fxx])�
-[r-cF] = display colour red when the measured value is between the
freely definable limit values [cFH]*
)
and [cFL]*
)
�
-[G-cF] = display colour green when the measured value is between
the freely definable limit values [cFH]*
)
und [cFL]*
)
*
)
The parameters [cFL] and [cFH ] can only be selected in the menu tree
when [r-cF] or [G-cF] were activated�
► Select [cFH] and set the upper limit value�
(only possible when [r-cF] or [G-cF] were activated)�
> The setting range corresponds to the measuring range and its minimum
limit is [cFL]�
