autoright C900145, Manual

Page: 4 / 16

SERVICE
1. Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in a risk of injury.
2. Accessories must be rated for at least the
speed recommended on the tool warning
label.
Important!: Do not operate the polisher
until you have inspected each part. If any
part is missing or damaged, do not use it.
Return the polisher to the place of purchase.
See WARRANTY.
READ AND FOLLOW ALL SAFEGUARDS
Like other power tools, polishers are safe
when properly used but can be dangerous
if misused. It is the responsibility of the user
to read and understand all instructions,
IMPORTANT SAFEGUARDS, and safety
precautions before operating the unit and to
use the unit properly. Failure to do so may
result in product damage, personal injury
or loss of life.
Do not try to repair (or disassemble) the
unit yourself. Repairs should be performed
by a qualified shop familiar with this unit
or returned to AutoRight (See warranty).
This unit is to be used with authorized parts
only. When using parts that do not comply
with the manufacturer’s specifications and
safety devices, the user assumes all risks
and liabilities.
SERVICING A DOUBLE-INSULATED
PRODUCT
In a double-insulated product, two systems
of insulation are provided instead of
grounding. No grounding means is provided
on a double-insulated product, nor should
a means of grounding be added to the
product. Servicing of a double-insulated
product requires extreme care and
knowledge of the system and should only
be done by qualified service personnel.
Replacement parts for a double-insulated
product must be identical to those parts in
the product.
EXTENSION CORDS
Make sure your extension cord is UL/
ETL/CSA listed and is in good condition.
When using an extension cord, be sure to
use one heavy enough for the current - for
lengths less than 18 feet, use a No. 18 AWG.
or heavier; for lengths more than 18 feet,
use No. 16 AWG. If in doubt, use a heavier
gauge. An undersized cord will cause a
drop in line voltage resulting in loss of power
and overheating.
STORAGE
Make sure unit is clean and dry before
storing. Store in a dry location. To prevent
damage, the electrical cord should not be
crimped during storage.
IMPORTANT SAFEGUARDS
ENGLISH 4