ColorMFA Manual, firmware v2.9.4_b31
11
Acceleration
To measure the acceleration time (from 0 to 100 km / h), go to
. A prompt appears on the screen. If the
current conditions match requirements (the vehicle is stopped, the engine
is running), then you will see the message "Start as soon as you are ready"
on the screen. The timer starts running as soon as the vehicle begins
moving and stops when the car reaches 100 km / h or when the timer
reaches 29.99 seconds. During the measurement, the current value of the
timer is displayed on the screen.
After the end of the measurement, the current acceleration time
and the best recorded time in the previous measurements will be dis-
played on the screen. You can also see the graph of the current measuring
trip on the display to show data on speed, boost and engine speed.
The best time is automatically saved. If it is necessary to erase the
stored values, you can reset by selecting "Reset".
During measuring, the car can accelerate to high rates of speed.
Please choose a place for measuring with a long straight away with good
visibility and no other vehicles or pedestrians in the area. Please do not
expose yourself and other’s to danger.
Graphs
Graphs show data based on chosen parameters and their chosen
colors. Up to 5 parameters allowed and color for each one.
Choose «Watch» to proceed with showing Graph.
There are notes showing colored parameters with values in cursor
position under Graph. Color of parameter equal to color of line of Graph.
