ColorMFA Manual, firmware v2.9.4_b31
10
Torque
In the ColorMFA, it is possible to carry out a power measurement with a graph of torque,
horsepower and boost pressure.
To carry out the measurement, go to (
) and select third gear
(manually for the automatic transmission) with RPM about 1500, press the acceleration pedal to
the floor (prior to kick-down position) and keep the pedal pressed until ~ 5000/7000 RPM (de-
pending on the type of engine). As soon as the acceleration pedal is partially or fully released,
the measurement will end and a graph with measured values will be displayed on the screen.
The metering data is not saved and will be erased immediately after exiting from Torque
screen.
During measuring, the car can accelerate to high rates of speed.
Please choose a place for measuring with a long straight away with good
visibility and no other vehicles or pedestrians in the area. Please do not
expose yourself and other’s to danger.
