ColorMFA Manual, firmware v2.9.4_b31
8
Measure
Trip data 1
Trip data 2
Summary
The current travel data of trip computer is indicated in «
Trip data 1
». Values automatically
reset to zero when ignition is off (including car is in safe mode) for more than 1 hour. You can
manually reset the data by selecting «
Clear
». «
Trip data 1
» indicates the average values gath-
ered during the total of the current trip but no previous trips.
There’s accumulated travel data of the trip computer indicated in «
Trip data 2
». These
values will not automatically reset to zero. You can manually reset the data by selecting «
Clear
».
Values will reset to zero in the event of a data overflow. «
Trip data 2
» indicates the average
values gathered from last 5 trips.
The
"Summary"
screen displays a summary of the data with key data/parameters like
RPM, temperatures, battery voltage, etc. The
"Statistics"
screen displays data based on «
Trip
data 1
» and «
Trip data 2
».
