ColorMFA Manual, firmware v2.9.4_b31
18
Main screen
In ColorMFA, you can customize the data displayed on the main
screen.
To select the data displayed in the bottom display area, use the
"Up"
and
"Down"
buttons to select the required field. When you press the
"Reset"
button, the selection cursor on the screen changes to flashing
mode. Press the
"Up"
and
"Down"
buttons to change parameter. Press the
"Reset"
button to confirm the selection. A note for the description of the
currently selected option is displayed in the middle of the screen.
You can also change the following:
Icons
– enable showing of icons instead of displaying the units of meas-
urement.
Audio data
- when this option is disabled, two additional parameters (possible to choose
which parameters to show) can be shown in the upper display area instead of the radio data.
Big Speed
- when this option is enabled, the current speed is displayed in large digits on
the main screen. Otherwise, the size of the digits is the same as for all the data of the main
screen.
Effects
Allows you to select the transition effect between parameters when
scrolling through the data on the main screen.
