21
REMOTE START FEATURE PROGRAMMING:
FEATURE “C” PROGRAMMING:
1. Turn the Ignition ‘switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
7
times (holding in on the 7th push) until
three
chirps with a long chirp is heard then release the valet switch. You are
now in the Start feature
‘C’
programming mode.
Press and release the transmitter button corresponding to the feature you
want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory
Default Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
3 Hours Timer
Start
2 Hours Timer
Start
2
Gasoline Engine
Diesel Engine
Wait-To-Start
Light
10 sec warm-up
Diesel Engine
Wait-To-Start
Light
15 sec warm-up
Diesel Engine
Wait-To-Start
Light
20 sec warm-up
3
20 minutes run
time
30 minutes run
time
10 minutes run
time
5 minutes run
time
4
Factory alarm
disarm with
channel
2
on
Without this
feature
5
+
Constant
parking light
output upon
Remote Start
Flashing parking
light output upon
Remote Start
Vehicle with
Turbo
(The system Can
be Armed with
the engine
running and
the engine will
run by itself after
the ignition is
turned off)
Press
and
buttons at the
same time to
control Engine
run time for
1
minute
Press
and
buttons at the
same time to
control Engine
run time for
3
minutes
6
+
Vehicle without
Turbo
(The system Can
not Arm with
the engine
running)
Five chirps =
Press
and
buttons at the same
time to control Engine run time for
5 minutes
Exit:
Turn Ignition to ‘ON’ position, or leave it for 15 seconds.
3 long chirps & 3 parking light flashes will confirm exit.
