
4-26
4 Maintenace
4
STEP 6 ADJUST TENSION
•
Use minimal tension, only enough so that drive sprockets properly engage the
belt
•
Run conveyor and check to be sure it runs smoothly
4.11 Maintenance CHECKS.
Checks are done during commissioning of the System and scheduled
maintenance time.
SLEEVE WRAPPER
1 - Main frame
Check that all guard doors and safety switches working correctly
Feet - adjusted,locknuts tight, check paintwork, remove tape etc from panels
Panels - Check for scratches - touch up with paint if required
2 - Raw Material
Film feed - if Gravity:
Dancer bar and brake- adjustment,
Pulleys, cones and shaft-condition of
Brake shoe- wear,adjustment
Shaft end-play adj't
Film feed - if Motor driven:
Cam for Sensor adjustment,
Take cover off and check chain lubrication
General-Check for all rollers (film support/feed) - must be free to spin (Very
Important!)
3 - Infeed Conveyor
Belt -tracking and tension,condition of
Drive & idler roller - ,noisy bearing,worn rubber clad,lube
Belt support - clean,(wear strips-for intralox belt only)
For DC Motor-brushes, noisy gearbox, sprocket align't, slack in chain, lube
Speed control - function, fuse
Conveyor guides - correct pieces used, adjusted, no missing/lose screws
Part No.
Qty
TL/TM/
TH
Description
WIRE BELT FOR 45W
,
MBEL24340- 0W
3/4/6m
BELT WIRE 356 x 1m SS
WIRE BELT FOR 60W
MBEL252A0- 0W
3/4/6m
BELT WIRE 508 x 1m SS
Summary of Contents for 45TLW20VL
