Autopack 45TLW20VL, Technical Manual, Page: 32 / 122

3-6
3 Installation
3
3.1-4 Operation Enviroment
3.1-5 Shrink Film
The width of the film can be selected by trial and error, but during the inquire
process the exact film width is given by our sales person and for the new product
film width can be calculator at our Shrink Wrap Calculator web page,
www.autopack.com and click on shrink wrap caculator button.
3.1-6 Row material limitation
Autopak machine is designed for automatic grouping and wrapping in LDPE film
only.
3.1-7 Commissioning
Once all of above is completed the unit is ready to be commissioned by
AUTOPACK representative engineers. The unit should not be operated prior to
commissioning unless a written permission is given by AUTOPACK or its
representative company. Such action may nullify some points of warranty
agreement.
Item Specifications
Site location Indoors
Ambient temper-
ature +10 t +50 C
Relative humidity 5 to 95%
Atmosphere
The inverter must not e exposed to dust, direct sunlight,
corrosive gases, flammable gas, oil mist, apor or water
drops. The atmosphere can contain only a low level of
salt. (0.01 mg/cm2 or less per year)
The inverter must not be subjected to sudden changes
in temperature that will cause condensation to form.
Altitude 1000 m max.
Atmospheric
pressure 86 to 106 kPa
Vibration 3 mm (Max. amplitude) 2 to less than 9 Hz
9.8 m/s2 (9 to less than 20Hz)
2 m/s2 ( 20 to less than 55Hz)
1 m/s2 ( 55 to less than 200 Hz)