6 Vision Sensor Program [Vision Master]
© Copyright Reserved Autonics Co., Ltd.
43
6.3.3
Installation folder structure
This section explains the folder structure created when you installed Vision Master.
The Vision Master folder is created in [C:\Program Files (x86)\Autonics\] as a subfolder unless
you select a new destination to change location of Vision Master folder.
After Vision Master is installed completely, Vision Master installation folder and related folders
are created as follows in [C:\Users\(Account name)\Documents\Autonics\] as subfolders and
work groups and documents are saved in. The program and all relevant documents are stored in
these folders.
(1)
Image folder
If Save Result Image inspection parameter of Vision Master is set to ON, inspection result
images are saved in the designated location. Saving location is fixed, so that is cannot be
changed by user.
Inspection result images are saved in [C:\Users\(Account name)\Documents\Autonics\Vision
Master\Image\ResultImage].
(2)
Sample folder
This folder contains work groups for samples. Load sample files from this folder to Vision
Master to test inspection.
(3)
Work folder
When saving work groups from Vision Master to PC, the work groups are saved in this folder.
When copying work groups from a device to PC using work group manager, the work
groups are saved in this folder.
If the saving location is changed when saving work groups in PC, work groups are saved in
the changed folder.
(4)
Log folder
Log files of connection/disconnection with a device or inspection result are saved.
6.3.4
Removal of the program
There are procedures to uninstall Vision Master, Start > Program > Vision Master > Uninstall or
Start > Setting > Control Panel > Add/Remove a Program > Vision Master.
When a confirmation window appears after selecting Remove, click [Yes] button to remove
Vision Master from the computer.
.