-|Transparent Guide|-
Detach the Case or DIP Switch Cover
■
FXM
•
Push and pull the groove of DIP switch cover with a flat
head (-) driver to the front, detaching the cover from the
case.
■
FXH
•
Push the groove of the front guide with a flat head (-)
driver and pull it to the front.
•
Pull the front guide to the front. The case is detached.
DIP switch is located inside.
Caution: Turn OFF the power before detaching the cover or case.
Caution: When using the tools, be careful not to be wounded.
DIP Switch Setting
ON
OFF
SW1
8
7 6
5
4
3
2 1
5
4
3
2 1
SW2
•
Detach the case or cover of DIP switch
and proceed the settings. See the ‘Detach
the Case or DIP Switch Cover.’
•
How to change the settings:
power OFF → change settings → power
ON → press [RESET] key or input the
RESET signal (≥ 20 ms) to the external
terminal.
■ DIP SW1
■ DIP SW2
SW1
Function
Defaults
Counter
Timer
1
-
Time range
OFF
2
Input operation
mode
OFF
3
OFF
4
Count up / count down
OFF
5, 6, 7 Output operation mode
01)
OFF
8
OUT1 One-shot output
02)
OFF
01) Except the indicator model.
02) Only for 2-stage setting model.
SW2
Function
Defaults
Counter
Timer
1
CP1, CP2, INHIBIT, RESET
input logic
OFF
2
Max. counting
speed
-
OFF
3
OFF
4
Counter / Timer
ON
5
Memory retention
OFF
•
[Counter] Input operation mode
•
Output operation mode
(1-stage / 2-stage setting model)
SW1
Count up / count down &
input operation mode
4
3
2
OFF OFF OFF
Count
up
Up / Down - A
(command)
OFF OFF ON
Up / Down - B
(individual)
OFF ON OFF
Up / Down - C
(phase difference)
OFF ON ON
UP
ON OFF OFF
Count
down
Up / Down - D
(command)
ON OFF ON
Up / Down - E
(individual)
ON ON OFF
Up / Down - F
(phase difference)
ON ON ON
Down
SW1
Output operation mode
7
6
5
Counter
Timer
OFF OFF OFF F
-
OFF OFF ON N
OFF ON OFF C
OFF ON ON R
ON OFF OFF K
ON OFF ON P
ON ON OFF Q
ON ON ON
S
S
•
OUT1 One-shot output
(2-stage setting model)
SW1-8
OUT1 One-shot output
ON
One-shot
OFF
Hold
•
[Timer] Time range
SW1
Time range
3
2
1
4-digit
6-digit
8-digit
OFF OFF OFF
99.99 s
99999.9 s
999999.99 s
OFF OFF ON
999.9 s
999999 s
9999999.9 s
OFF ON OFF 9999 s
99 m 59.99 s
99999999 s
OFF ON ON
99 m 59 s
999 m 59.9 s
99999 m 59.9 s
ON OFF OFF
999.9 m
99999.9 m
9999999.9 m
ON OFF ON
99 h 59 m
99 h 59 m 59 s
999 h 59 m 59.9 s
ON ON OFF
999.9 h
9999 h 59 m
9999 h 59 m 59 s
ON ON ON 9999 h
99999.9 h
99999 h 59.9 m
•
Input logic
• Counter / Timer
SW2-1
Input logic
ON
NPN (no-voltage input)
OFF
PNP (voltage input)
SW2-4
Counter / Timer
ON
Counter
OFF
Timer
•
[Counter] Max. counting speed
• Memory retention
SW2
Max. counting speed
3
2
OFF
ON
1 cps
OFF
OFF
30 cps
ON
OFF
2 kcps
ON
ON
5 kcps
SW2-5
Memory retention
ON
×
OFF
○
Input Connections
•
Input: CP1, CP2 (INHIBIT), RESET
• Max. counting speed in the contact input: 1 or 30 cps setting (counter).
■ No-voltage (NPN) input
•
Solid-state input
+12 V
0 V
Internal circuit
of input part
Sensor
(NPN output)
Brown
Black
Blue
Counter / Timer
5.4 kΩ
5.4 kΩ
+12 V
0 V
Internal circuit
of input part
Sensor
(NPN open collector output)
Brown
Black
Blue
Counter / Timer
•
Contact input
5.4 kΩ
+12 V
0 V
Internal circuit
of input part
Counter / Timer
■ Voltage (PNP) input
•
Solid-state input
10.8 kΩ
+12 V
0 V
Internal circuit
of input part
Sensor
(PNP output)
Brown
Black
Blue
Counter / Timer
10.8 kΩ
+12 V
0 V
Internal circuit
of input part
Sensor
(PNP open collector output)
Brown
Black
Blue
Counter / Timer
•
Contact input
10.8 kΩ
+12 V
0 V
Internal circuit
of input part
Counter / Timer
