![background image](http://html1.mh-extra.com/html/automation-technology/c4-2350-gige/c4-2350-gige_hardware-reference-manual_3021830044.webp)
40
•
C4-2350-GigE Camera Hardware Reference Manual Rev. 2.1
Integrated RS232 serial interface and Camera Boot Log
During boot procedure, the camera outputs a log via the integrated RS232 serial interface. The
external C4-I/O-Panel provides a D-sub 9-pin male socket for monitoring the boot log. A null-modem
cable (crosslinked) must be used to connect the C4-I/O-Panel to a host PC. The parameters of the
serial communication are listed as follows:
Baudrate 115200
Data bits
8
Parity None
Stopbits 1
Handshake None
Sample camera boot log
**************************************
MCB InitDone. (WaitClks 92637(104465))
Bootloader(build Jan 6 2012, 12:36:24)
Executing program starting at address: 0x50000000
**************************************
00004677 ms: Camera start.
-------------------------------------------
Start HardwareInit.
Reset sensor.
PLL sensor.
Wait PLL locked. Locked.
Start sensor streaming.
StreamAlignMV40 done.
Stream pattern stable (0x032A).
Start serdes error monitor.
Reset sensor to defaults.
-------------------------------------------
Ready to start GEV.
00004721 ms: Start system monitoring.
Stack info: Current Stack position changed to 0x00001F94.
00004729 ms: Load Bootstrap registers.
00004733 ms: **************************************
00004737 ms: Camera type: 2350
00004740 ms: Model: C4_2350_GigE