![background image](http://html1.mh-extra.com/html/automation-technology/c4-2350-gige/c4-2350-gige_hardware-reference-manual_3021830013.webp)
C4-2350-GigE Camera Hardware Reference Manual Rev. 2.1
•
9
Name
Rev.
Interface
Access Description
OffsetX 1.0
IInteger
R/W
X Offset of AOI
TestImageSelector
1.0
IEnumeration
R/W
Selection of the test image to be used.
- Off
- GreySensorColumnPattern
LinePitch 1.0
IInteger
R
Distance between consecutive lines in bytes.
PixelDynamicRangeMin 1.0
IInteger
R
Minimum pixel value sent by the camera.
PixelDynamicRangeMax 1.0
IInteger
R
Maximum pixel value sent by the camera.
AcquisitionControl
Name
Rev.
Interface
Access
Description
AcquisitionStart
1.0
ICommand
W
Issues the START command. This starts the
acquisition.
AcquisitionStop
1.0
ICommand
W
Issues the STOP command. This stops the
acquisition.
AcquisitionMode
1.0
IEnumeration
R/W
Defines the type of acquisition:
- SingleFrame
- MultiFrame
- Continuous
AcquisitionAbort 1.0
ICommand
W
Issues the ABORT command. This immediately
aborts the acquisition without completing the current
frame.
AcquisitionFrameCount 1.0
IInteger
R/W
Number of frames to be acquired in MultiFrame
acquisition mode. The minimum allowable value is 1.
AcquisitionFrameRateAbs
1.2
IFloat
R
The frame rate of the imager. Absolute units are in
Hz.
AcquisitionStatusSelector 1.2
IEnumeration
R/W
Selector for AcquisitionStatus to read:
- AcquisitionTriggerWait
- AcquisitionActive
- AcquisitionTransfer
- FrameTriggerWait
AcquisitionStatus[AcquisitionStat
usSelector]
1.2
IBoolean
R
Status of the selected acquisition flag
AcquisitionMaxBufferedFrameCo
unt
AT
IInteger
R
Maximum number of buffered frames
CameraControls – AOIs (Areas Of Interest)
Name
Rev.
Interface
Access
Description
MaxNumAOIs
AT
IInteger
R
Maximum number of AOIs.
NumAOIs
AT
IInteger
R/W
Number of used AOIs.
ImageModeAoiSelector
AT
IInteger
R/W
Selects the AOI to show in image mode
AoiSelector
AT
IInteger
R/W
Selects which AOI to control
AoiHeight AT
IInteger
R/W
Number of sensor rows in AOI
AoiOffsetY AT
IInteger
R/W
Offset distance in rows between the first row of AOI
and the first row of sensor chip
AoiThreshold AT
IInteger
R/W
Intensity threshold value for selected AOI.
CameraControls – ModeAndAlgorithmControls
Name
Rev.
Interface
Access
Description
CameraMode
AT
IEnumeration
R/W
Selects the camera mode or algorithm:
- Image
- CenterOfGravity
- Threshold
- MaximumIntensity
ProfilesPerFrame AT
IInteger
R/W
This
feature represents the number of Profiles per
Frame in 3D-Mode expelled by the camera.
AbsOffsetPos AT
IBoolean
R/W
True:
Position
values are referenced to the first row
of sensor chip (absolute position).
False: Position values are referenced to the first row
of AOI.
TrshFirstFalling AT
IBoolean
R/W
Stops
the
position calculation along an AOI column,
as soon as the falling edge of a Gauss curve is
detected.
NumCOGSP
AT
IInteger
R/W
Number of subpixel bits of COG output (0-6).