background image


 

www.qhyccd.com 

 
 

GENERAL INFORMATION 

The adapter system stated in this document is intended for the following model: (small to medium) sized cooled 
CMOS camera, QHYOAG series, QHYCFW filter wheel series, A series integrated CCD camera。 The legacy CCD 
cameras  (QHY23  and  before) require  custom  adapters.  Scientific  grade  camera  usually  involved  custom  adapter 
solution, which is not included in this document.  

Prior to your selection, there are few basic concepts: 

1.

 

Back focus distance: To simplified, this is the centered-focus distance of a lens or group of lenses. In camera 
system, this is distance of which the focused image from the center of a lens or group of lenses projected onto 
a  film  or  sensor.  In  another  word,  this  is  the  distance  between  the  back  of  lens  to  the  camera  sensor.  This 
specification can usually be found on the lens or telescope. This is the most important specification for camera 
to acquire a sharp image through an optical instrument. 

2.

 

How to reach the optimum back focus distance: In general, the back focused distance is a fixed specification. 
The flange distance in conventional camera system is equivalent to back focus distance; for example, the modern 
CANON DSLR EF lens system has a back focus of 44mm. Unlike the DSLR lens flange, the back-focus distance 
of a telescope is not fixed and covers a range of distance. This is due to the differences of optical structure and 
focusing system. Alternatively, if a flat field generator (flattener) is used in an Astro-Imaging chain, the back-
focus system of the flattener is used for determining the correct back focus distance.  
To summarize, the correct telescope back focus distance (BF, and this is the distance behind focuser, flattener 
and or other optical correctors) should be calculated per follow: 

 

 𝑀𝑎𝑥𝑖𝑚𝑢𝑚 𝑇𝑒𝑙𝑒𝑠𝑐𝑜𝑝𝑒 𝐵𝐹 ≤ 𝐶𝑎𝑚𝑒𝑟𝑎 𝐵𝐹 + 𝐹𝑖𝑙𝑡𝑒𝑟𝑤ℎ𝑒𝑒𝑙 𝐵𝐹 + 𝑂𝐴𝐺 𝐵𝐹 + 𝑎𝑑𝑎𝑝𝑡𝑒𝑟 𝐵𝐹

 

 

The following table includes the back-focused system consumed by respective the QHYCCD camera.  

Name 

Model 

Back focus Consumed  

Small sized  
cooled Camera 

QHY183、178、224、290、174 
163、294*、550 

10mm  
(Not incl. adapter# 020085) 

Medium sized 
cooled camera 

QHY128、168、247、367、268、600 

18mm 
(Not incl. adapter#020002) 

* The QHY294 used a bigger housing body only and the adapter remain the same of small sized camera.  

Name 

Model 

Back focus consumed 

OAG 

S/M/L 

10mm  

QHYCFW3 

15.5mm/20mm 

17mm/20.5mm 

21.5mm 

XL 

21.5mm 

3.

 

The thread 

 

M represent external thread, for example, M42 represents external thread of a radius of 42mm.  

 

F represent internal thread, for example, M54 represents internal thread of a radius of 54mm. 

Summary of Contents for QHY128



















Reviews: