8
Technical Manual
NAM-CLEAR-MT-EN-A
The information contained in this document is the property of Automatic Systems
and is confidential. The recipient shall refrain from using it for any purpose other
than for the use of the products or the execution of the project to which it refers
and from communicating it to third parties without prior written agreement from
Automatic Systems. The document is subject to change without notice.
3.4. Packing list
If the booth is delivered unassembled:
Ref.
Qty Description
Location
(most of the screws are on the specified
component or assembly)
1
1 Base
2
1
Right upright NSA
3
1
Left upright NSA
4
1
Right upright SA
5
1
Left upright SA
6
1 Canopy
6a: Canopy with electronics
6b: Canopy cover – section 1
6c: Canopy cover – section 2
7
1
Ceiling mount with detectors
8
1
Right-side glass panel
8e: Glass panel bracing
8i: Glass panel bracing
9
1 Left-side
glass
panel
9e: Glass panel bracing
9i: Glass panel bracing
10
1
Mobile obstacle NSA
11
1
Mobile obstacle SA
12
1
Inside
column
30
4
#5-M8 x 20 Flat socket cap screw
2, 3, 4, 5
31
8
#3-M5 x 10 Button socket cap screw
6a, 6b, 6c
32
4
#5-M8 x 20 Flat socket cap screw
6a, 2, 3, 4, 5
33
4
Ring
6a, 2, 3, 4, 5
34
sq
Plastic shims
6a, 8, 9
35
3
Gray silicone cartridge
8, 9
36
12
M8 x 35 Hex cap screw (13-mm wrench) 6a, 10, 11
37
12
M8 Lock washer
6a, 10, 11
38
12
Nylon washer
6a, 10, 11
39
8
#4-M6 x 16 Button socket cap screw
6a, 7
40
10
#2.5-M4 x 10 Button socket cap screw
12
41
4
#4-M5 x 16 Socket cap screw
1, 6a, 12b
42
4
M5 Flat washer
1, 6a, 12b
43
4
M5 Lock washer
1, 6a, 12b
1
2
3
4
5
6a
6c
6b
7
8
9
10
11
8i
8e
12
9i
9e
