INSTRUCTIONS CABRI-30P/35P
Page12
SWING GATE OPENER
10. Refer to Figure 21, the distance between front plate of the motor and rear plate is
798mm, the difference in height is 22.5mm.
11. Clamp and fix the motor front plate on the door temporarily
.
Figure 21
Figure 22
12. Lift up the motor and insert the screws into the front plate.
13. Open the gear motor cover and release the screw, then take out the bolt as below
Figure23. Lift the motor overhead and push the gate to the end until the screw
holes of the motor end matches the holes on the rear plate as shown in Figure 23.1
and fasten the motor to the rear plate with bolt and screw as shown in Figure23.2.
Figure 23 Figure 23.1 Figure 23.2
